使用CxImage (Using MFC by a Static Library + Realese or Debug 模式)

一.使用CxImage(Using MFC in a Static Library + Debug 模式)
1.解压压缩包,打开Demo2/Console.dsw，设置如下:
Project -> Setting -> Using MFC in a Static Library(注意是所有的项目都设置成这个)
2.确保c/c++ -> Code Generation -> Using run-time library 为 Mutithreaded
3.Debug模式下编译,搜索*.lib文件,复制到工程目录,包含进工程(当前工程也必须是Using MFC in a Static Library + Debug 模式),即可,包含方法(点击这里)
注意:生成的LIB文件,比上面要少一个….不知道为什么…少了consoled.lib,但并无大碍,不包含它即可

二.使用CxImage(Using MFC in a Static Library + Realese 模式)
1.解压压缩包,打开Demo2/Console.dsw，设置如下:
Project -> Setting -> Using MFC in a Static Library(注意是所有的项目都设置成这个)
2.确保c/c++ -> Code Generation -> Using run-time library 为 Mutithreaded
3.Realese模式下编译,搜索*.lib文件,复制到工程目录,包含进工程(当前工程也必须是Using MFC in a Static Library + Realese模式),即可,包含方法(点击这里)
注意:生成的LIB文件,同样是少一个,不包含它即可

参考:
Open the CxImage workspace with all the libraries. Select Project->Properties. Select each project in the list and make sure they all have the same settings for the MFC library (Not Using MFC for a static library). Then select the C/C++ tab and select Code Generation in the combo box. In the Use Run-time Library combo box, make sure all of them are set to Single-Threaded (or multi threaded depending on your settings). Then remake all the libraries and try to recompile your project
Thanks Kelly. It works! Thanks again!:) It turns out that CxImage static lib projects, in my case, are not set uniformly the same; some uses MFC shared library while some uses MFC static library

原文地址:http://www.codeguru.com/forum/archive/index.php/t-261681.html

还是多查资料好啊…还是英语好…不过小讨论居然是08-31-2003, 11:01 PM,郁闷!